Progressive-international-electronics PIcon Console Manuel d'utilisateur télécharger pdf (Page 30)

PIcon Program & Report

Rev 2.0 June 2006

Page 26

Mode 11 — Print Reports/Program Print Header (Manager/Operator)

Mode 11 enables reports to be generated and printed on the printer attached to the PIcon, as

well as programming the print header. To enter this mode from the M 0, mode number

prompt, enter <11> on the numeric keypad and press <ENTER>.

P 0 will be displayed, prompting you to enter a report type code. Use the following table to

select which type of report you would like printed by the PIcon.

(If no printer is connected, display will read NOT ON LINE.)

1 Resettable Totals

2 Non-Resettable Totals

3 Shift 0 Totals (current shift)

4 Shift 1 Totals

5 Shift 2 Totals

6 Shift 3 Totals

7 Polled Dispenser Totals

8 Console Program Information

9 Print Header — Under Print Header, the print header for the printer receipt is created and

edited.

For printing reports 1-8, select report number, <1> through <8>, and enter it on the PIcon

keypad. Then press <ENTER>. Data for the report will be printed. To print additional

reports, select another report option.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37

Pas de commentaire

Progressive-international-electronics PIcon Console Manuel d'utilisateur Page 30